Polaroid PoGo™ Newsroom

Polariod Pogo - 2x3 Instant Digital Camera

Enjoy Instantly, Anywhere ™

QUICK-START GUIDE

Polaroid PoGo™ Instant Digital Camera

For a downloadable Quick-Start Guide click here.

Sections

Introduction


What It Is:
The Polaroid PoGo™ Instant Digital Camera is the first digital camera and printer combination that is portable enough to take anywhere.  The digital version of Polaroid’s iconic instant camera, the Polaroid PoGo™ Instant Digital Camera allows consumers to capture, view, crop and even add borders, then print their memories in less than 60 seconds on 2x3-inch, peel-off, sticky-backed paper.  The Polaroid PoGo™ Instant Digital Camera easily connects to a PC or Mac where photos can be uploaded and saved from the camera’s 16 MB internal memory or SD card (not included).

It uses ZINK™ Zero Ink™ Printing Technology from ZINK Imaging, which replaces ink cartridges or ribbons with paper made from a composite material that has embedded, heat-activated dye crystals. Before printing, the paper appears white.  Once the pictures are printed, they are immediately dry to the touch, durable and smudge and water resistant.

Polaroid PoGo™ Instant Digital Camera Specs

Click here to view the Polaroid PoGo™ Instant Digital Camera Fact Sheet.

ZINK Photo Paper™ Specs

Click here for more information on ZINK Photo Paper™ and ZINK™ Zero-Ink™ Printing Technology from ZINK Imaging.

Polaroid PoGo™ Instant Digital Camera Product Diagrams

 

Front View 

 
Rear View 

Getting Started

 Turning the Camera On and Off

 Charging the Battery

 Loading ZINK Photo Paper™

 Taking a Picture

 Printing an Image
 

 Safety Information


Polaroid Corporation declares that this Instant Mobile Printer is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna
  • Increase the separation between the equipment and receiver
  • Connect the equipment into an outlet or on a circuit different from that to which the receiver is connected
  • Consult the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with the FCC/IC radiation exposure limits sent forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET62 and RSS-102 for the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that is should be installed and operated with at least 20cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet, and ankles).

This device complies with Part 15 of the FCC Rules and the RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

CAUTION: RISK OF EXPLODING IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

BATTERY CAUTIONS

  • Use only the provided charger with this product.
  • Only charge the battery as recommended by the instructions.
  • The battery provided with his product is intended for this product only.
  • Prolonged use of the printer will result in the battery becoming warm.

BATTERY WARNINGS

  • Avoid contact with leaking or a damaged battery.
  • Do not short battery terminals,
  • Adult supervision is recommended when product is used by young children.
  • Avoid areas of excessive heat or moisture.
  • Do not disassemble the battery.

This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for ensuring that this product is disposed of properly. To find out how to properly dispose of this product, please go to www.polaroid.com and click on “Company“ or call the customer service number for your country listed in the instruction manual.

 
©2009 Polaroid PoGo™